WS-C2960XR-48LPS-I

Cisco Catalyst 2960-XR series switches offer power resiliency with optional dual field-replaceable power supplies and IP Lite Cisco IOS software with dynamic routing and Layer 3 features. WS-C2960XR-48LPS-I is one of 2960-XR switches, IP Lite switch, supporting forty-eight 10/100/1000 Ethernet ports with POE+ and 4 x 1G SFP uplink interfaces. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM stub, etc.

Quick Specs

Table 1 shows the Quick Specs.

Product Details

Figure 1 shows the front panel of WS-C2960XR-48LPS-I.

Note:

·There are Forty-eight 10/100/1000 Ethernet Gigabit Ports and four 1G SFP uplink Ports on the front panel.

·Two USB Type A ports and one USB mini-Type B (console) port are on the left.

·This switch offers one RJ-45 console port and one Ethernet management port on the left of the front panel.

·Power over Ethernet Plus(PoE+) supports up to 370W of PoE budget for 12 ports with 30W per port or 24 ports with 15.4W per port or 48 ports with 7.4W per port.

Figure 2 shows the back panel of WS-C2960XR-48LPS-I.

Note:

(1) FlexStack-Plus module slot and cover   (2) Power supply slot (with blank module)   (3) AC OK LED   (4) PS OK LED

(5) AC power connector on the power supply module

The WS-C2960XR-48LPS-I supports stacking with the optional stack kit. It has the FlexStack-Plus module (hot-swappable) that inserts in the slot located in the switch rear panel, and a 0.5-meter FlexStack cable to connect the FlexStack-Plus module ports. The stack module should purchase separately.

The Accessories

Table 2 shows some accessories of WS-C2960XR-48LPS-I.

Get more information

Do you have any question about the Cisco Catalyst 2960XR-48LPS-I switch?

Contact us now via or .