WS-X4606-X2-E Overview
WS-X4606-X2-E is the Cisco catalyst WS-X4606-X2-E line-card. It is designed for high-speed backbone and switch-to-switch applications. Integrated 6 ports 10GB X2 or 12 ports 1 GE SFP with TwinGig Converter Module, the ports can be used interchangeably as Gigabit Ethernet and 10 Gigabit Ethernet to support phased migration from Gigabit Ethernet to 10 Gigabit Ethernet. This WS-X4606-X2-E is similar with the WS-X4606-X2-E=. The WS-X4606-X2-E= is a spare one.
Quick Specs
Figure 1 shows the appearance of WS-X4606-X2-E.
Table 1 shows the Quick Specs.
Product Code |
WS-X4606-X2-E |
Line-Card Type |
Cisco Catalyst 4500 46xx E‑Series Line Cards |
Number of Ports |
6 |
Port Speed |
10GBASE-X |
Per-Slot Bandwidth |
24 Gbps |
Chassis Support |
Cisco Catalyst 4503-E, 4506-E, 4507R-E, 4507R+E, 4510R-E, and 4510R+E1 |
Supervisor Support |
Supervisor Engine 8-E, Supervisor Engine 8L-E, Supervisor Engine 7-E, Supervisor Engine 7L-E, Supervisor Engine 6-E, Supervisor Engine 6L-E |
per-slot capacity |
24 gigabits |
Modules |
·10GBASE-X (X2) and 1GBASE-X (SFP) ·Up to 6 ports 10GE X2 or 12 ports GE SFP using TwinGig Converter Module ·TwinGig modules must be used in groups of three: ports 1-3 or ports 4-6 |
Cisco IOS Software |
Cisco IOS Software Release 12.2(40)SG or later |
Enterprise and commercial |
designed for high-speed backbone and switch-to-switch applications |
Service provider |
10GE/GE mix aggregation for DSLAM/PON/mobile data backhaul |
L2-4 Jumbo Frame support |
up to 9216 bytes |
Max Rated Power (W) |
50 |
Rated MTBF (Hours) |
535,717 |
Package weight(KG) |
7.1800 |
·All power numbers shown in Table 1 are maximum values recommended for facility power and cooling capacity planning. These figures are not indicative of the actual power draw during operation. Typical power draw is about 20 percent lower than the maximum value shown.
Get more information
Do you have any question about the WS-X4606-X2-E?
E-mail: info@falcon-atlantic.com
SKYPE: CALL ME