EHWIC-4ESG-P

Cisco EHWIC-4ESG-P Ethernet Enhanced High-Speed WAN Interface Card supports 4-port Cisco Gigabit EtherSwitch 10/100/1000BASE-TX autosensing EHWIC with POE. This EHWIC delivers comprehensive layer 2 switching features, the 4-ports POE Gigabit Ethernet ports provide up to 20W/port that give the options to power up IP phones, IP cameras, Wireless Access Point or other network devices. With the optional integration of Cisco Unified Communications Manager Express, the router can also provide call processing for the phones.

The Features

Figure 1 shows the EHWIC-4ESG-P.

☆ 4 POE Gigabit Ethernet ports, 20W per ports, Layer 2 features

☆ Interface switching module for 1900/2900/3900 series router

☆ Security, QoS, Multicast management, Voice Vlan, SPAN

☆ Simplify management and troubleshoot, Reduce the Total cost of Ownership, Enhance scalability

☆ Cisco EnergyWise, Cisco Enhanced Power over Ethernet (ePoE), Cisco TrustSec

The Supported Routers

Figure 2 shows that EHWIC-4ESG-P can be installed in the Cisco ISR G2 routers.

Table 1 shows Cisco Gigabit Ethernet EHWIC Support Comparison. These routers all support EHWIC-4ESG-P.

The Supported SFP Transceiver Module

Table 2 shows the Supported SFP Transceiver module on the EHWIC-4ESG-P.

Compare to Similar Item

Table 3 shows the comparison between EHWIC-4ESG-P and EHWIC-4ESG.

Get more information

Do you have any question about the EHWIC-4ESG-P?

Contact us now via or .