Cisco

VWIC3-2MFT-G703

  • Sale
  • $1,871.00
  • Regular price $4,782.00
Tax included.


VWIC3-2MFT-G703 Overview

Cisco third generation Voice / WAN T1/E1 interface card supports both voice and data application on Cisco ISR 2 1900/2900/3900 series platform. This module integrate with 2 T1/E1 interfaces which one port can configure for unstructured E1 (G.703) and the other port configure structured framed E1 (G.704) to support voice or WAN connectivity.

Quick Specs

Figure 1 shows the appearance of VWIC3-2MFT-G703.

 VWIC3-2MFT-G703

Table 1. Cisco MFT VWIC3 Platform Support and Minimum Cisco IOS Software Release Requirements.

 

VWIC3-2MFT-G703

Cisco 1900 Chassis EHWIC Slots

15.0(1)M3, 15.1(1)T1, 15.1(2)T

Cisco 2900 Chassis EHWIC Slots

15.0(1)M3, 15.1(1)T1, 15.1(2)T

Cisco 3900 Chassis EHWIC Slots

15.0(1)M3, 15.1(1)T1, 15.1(2)T

Table 2. Cisco MFT VWIC3 Card Feature.

Part Number

Number of Ports

T1 Support

E1 Support

Unstructured E1 (G.703) Support

Data Support WIC Mode

Voice Support VIC*

Drop-and-Insert Multiplexing

VWIC3-1MFT-G703

1

Yes

Yes

Yes

Yes

Yes

Yes

VWIC3-2MFT-G703

2

Yes

Yes

Yes

Yes

Yes

Yes

Table 3. Cisco MFT VWIC3 Card Configuration.

Configuration Description

2-port Cards

VWIC3-2MFT-T1/E1, 
VWIC3-2MFT-G703

Data Only

Serial Data (channel-group*)

2 total
2 per port

Voice Only

Voice CAS (ds0-group**)

48 total (T1)
62 total (E1)
1 per timeslot

Voice, Video and Data

PRI (pri-group***)

2 total
1 per port

Drop & Insert (tdm-group****)

48 total (T1)
62 total (E1)
1 per timeslot

* Channel Group refers to bonding of one or more timeslots into a single HDLC-framed serial connection for IP data traffic connectivity. This is used for HDLC, Frame Relay and MLPPP serial WAN connections.

** Ds0 Group refers to Bonding of one or more timeslots into a single TDM voice connection using Channel Associated Signaling (CAS) such as E&M, FXS or FXO. This is used for TDM PBX or PSTN connections and typically deployed only on T1.

*** PRI Group refers to bonding of two or more timeslots into a single TDM connection using ISDN signaling. This is typically used for TDM PBX or PSTN voice and video connections on T1 and E1, and also for data WAN connections on E1. Each call on the PRI is individually indicated as being a voice, video or data call with the ISDN bearer capability delivered with the call. Signaling is done on the D-channel, which is always channel 24 on a T1, and channel 31 on an E1.

**** TDM Group refers to cross-connecting one or more timeslots from one TDM interface to another. This is used to groom channels from different access points onto a combined T1 or E1 uplink. Since the router merely cross-connects and does not interpret or route the traffic from the ingress interface to the egress interface, the traffic type (voice, video and data) is transparent to the router.

Get more information

Do you have any question about the VWIC3-2MFT-G703?

Contact us now via or .


E-mail: info@falcon-atlantic.com
SKYPE: CALL ME